Quality RC products

Home

(416) 418 1382 | Call Today

Accessories

Actuonix

Air Accessories

Festo Fittings

Fuel Accessories

Hysol Glue

Jets

Wheels and brakes

ALTECARE RC

Welcome to the world

A forward thinking radio like no other

Jeti Telemtry Accessories

Jeti Telemetry JetiBox Profi Monitor/Programmer

$US 160

The JetiBox Profi is designed to be an easy to use mobile wireless device for viewing, processing and storing your telemetry data or for programming JetiBox compatible equipment. The JetiBox Profi also is designed to work in two different wireless modes with the Jeti Duplex 2.4GHz systems. In Monitor mode it can only receive its data by "listening" to the existing connection between a Duplex 2.4GHz equipped transmitter (or transmitter with Duplex module) and a Duplex receiver. In Telemetry mode it receives its data directly by "listening" to the existing Duplex 2.4GHz receiver and installed sensors or telemetry equipped ESCs like Jeti Mezon.

Jeti Telemetry Expander E2 EX

$US 35

The Jeti telemetry expander module allow you to increase the number of telemetry sensors in your aircraft. The E2 ex Expander allows you to add up to two additional sensors directly to any of the Duplex EX 2.4GHz receivers.

Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time.

Jeti Telemetry Expander E4 EX

$US 35

The Jeti telemetry expander module allow you to increase the number of telemetry sensors in your aircraft. The E4 ex Expander allows you to add up to four additional sensors directly to any of the Duplex EX 2.4GHz receivers.

Jeti Telemetry Sensor Air Pressure MBar EX & Expander

$US 99

Jeti's MBar EX is a sensor that measures high pressures of non-corrosive and unionized gases and liquids. The sensor records the maximum and minimum measured values of pressure and temperature. Also, it is possible to set an alarm for a high pressure measurement or a pressure drop. The information from the sensor is transmitted to the user via Duplex EX system. The MBar EX can be used for measuring pressure in containers with compressed air (retractable landing gear systems) or for controlling the oil pressure in hydraulic systems. Use with 1/16" (1.6mm) inside diameter pressure tubing.

Jeti Telemetry Sensor Airspeed MSpeed 450 EX

$US 98

Jeti Telemetry MSpeed 450 EX sensor uses dynamic pressure to measure the true airspeed of your model. Dynamic pressure is measured, using a pitot tube, by finding the difference in ram air pressure and static air pressure. The MSpeed 450 EX allows you to set both a low speed alarm and a high speed alarm.

Measures: 80 - 450 km/h with 5 km/h resolution
Operational Voltage: 3.5V to 8.4V
Dimensions: 25mm x 22mm x 13mm
Weight: 21g /pitot
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry Sensor Airspeed MSpeed EX

$US 76

Jeti Telemetry MSpeed EX sensor uses dynamic pressure to measure the true airspeed of your model. Dynamic pressure is measured, using a pitot tube, by finding the difference in ram air pressure and static air pressure. The MSpeed EX allows you to set both a low speed alarm and a high speed alarm.

Measures: 25 - 350 km/h with 5 km/h resolution
Operational Voltage: 3.5V to 8.4V
Dimensions: 25mm x 22mm x 13mm
Weight: 21g /pitot
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry Sensor Airspeed MSpeed Replacement Pitot Tube

$US 23

Jeti Telemetry Sensor Altimeter MAlti EX

$US 65

eti's MAlti EX is a system that measures atmospheric pressure and using obtained data it calculates the altitude above sea level, temperature, and air pressure. The sensor also alerts you if any alarm setting is exceeded.

MAlti is a very sensitive pressure sensor. Any change in pressure causes a change in the indicated altitude. The sensor should be mounted in the model in such a way that the sensor is not affected by air pressure flowing inside of the model, but only by static atmospheric pressure. In other words do not install sensor in direct airflow. For the most accurate measurement, do not install sensor near any components that generate heat during flight.

Jeti Telemetry Sensor Current/Voltage MUI EX

200A: $US 62 150A: $US 53 75A: $US 43

50A: $US 42 30A: $US 38

Available in five amperage ranges, the MUI EX sensors measure voltage (U), current (I) and consumed battery capacity of the flight batteries in your model. Through the Duplex 2.4GHz system and JetiBox Profi or Jeti Transmitter you can monitor your flight battery performance in real time. The MUI EX sensors allow you to program alarms for low voltage, high current and capacity used.

Measures Voltage: 0 to 60V
Measures Amperage: 0 to 30A/50A/75A/150A/200A
Operational Voltage: 3.5V to 8.4V
Dimensions MUI 30: 20mm x 16.5mm x 5mm
Dimensions MUI 50/75: 27mm x 19mm x 11mm
Dimensions MUI 150/200: 29mm x 19mm x 11mm
Weight: 10g, 19g, 21g, 25g, 30g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry Sensor Fuel Flow MFlow Gas EX

$US 199

Jeti Telemetry Fuel Flow MFlow T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel. The Jeti MFlow EX sensor allows you to set your "Low/High Fuel" alarms and gives you accurate reading of fuel consumption. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32" (2.4mm), Large 1/8" (3.2mm) ID fuel tubing.

Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 3.5V to 8.4V
Dimensions: 75mm x 40mm x 20mm
Weight: 35g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry Sensor Fuel Flow MFlow Turbine EX

$US 199

Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 3.5V to 8.4V
Dimensions: 75mm x 40mm x 20mm
Weight: 35g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry Sensor GPS MGPS EX

$US 115

Knowing exact information about the altitude and distance of your model in space can be extremely important. By using the GPS satellite positioning system, the MGPS EX sensor can show you the exact position of your model. The MGPS EX calculates speed, altitude, course azimuth, distance from the point of origin and the total distance covered. The 8MB version of the MGPS EX can record up to 18 hours of continuous data at one sample per second. You can also download your GPS data to a PC for a more detailed analysis or to map your flight.

Dimensions: 50mm x 30mm x 12.5mm
Weight: 24g (with wires)
Recording Time: 4MB Up to 9 hours/8MB Up to 18 hours
Operation Temp: -20C to +85C
Supply Voltage: 3.5V to 8.4V
Minimum Current Draw: 40mA
Maximum Current Draw: 100mA

Jeti Telemetry Sensor Li-Poly Battery MULi 6s EX

$US 45

The MULi6s EX sensor is used with a Duplex receiver to monitor the voltage of your (up to) 6 cell Lithium battery pack. The MULi6s EX will monitor the total pack voltage (up to 6 cells) as well as the voltage of each individual cell through the battery balance connector and also includes a user-defined low voltage alarm and an error alarm.

Measures: 3V to 25.2V
Supply Voltage: 3.5V to 8.4V
Dimensions: 36mm x 20mm x 5mm
Weight: 6g
Current Draw: 9mA
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi


Jeti Telemetry Sensor MVario2 EX Variometer/F5J-ALES Limiter & Expander

$US 99

MVario2 is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above sea level, airspeed, and the rate of climb as well as the rate of descent. Changes in climb and descent rates are signaled as well. The sensor also alerts you if any alarm setting is exceeded.

The sensor enables an acoustic signal for the climb rate/descent rate or for exceeding of a pre-adjusted limit value. The acoustic signal consists of 4 different kinds (steps) for climbing and the same amount of steps for descending. The step width can be adjusted by the user. The climb signal consists of short interrupted tones, the descent signal consists of long permanent tones.

Dimensions: 35mm x 16mm x 7mm
Weight: 5g (with wires)
Accuracy for absolute/relative altitude: +/-9m, +/-3m
Measurement Range: 100-1100 mBarr
Operation Temp: -10C to +85C
Supply Voltage: 3.5V to 8.4V
Current Draw: 15mA

Jeti Telemetry Sensor RPM Brushless MRPM-AC EX

$US 41

The MRPM-AC EX sensor is used to measure the speed (RPM) of brushless motors through direct connection with two of the three motor wires. For accurate data, you must set your motor's pole count in the MRPM-AC EX using the JetiBox. The MRPM-AC EX allows you to set multiple alarms and can even display the motor power in Watts.

Dimensions: 19mm x 14mm x 4mm
Weight: 6g (with wires)
Precision: 10U per minute
Operation Temp: -10C to +85C
Supply Voltage: 3.5V to 8.4V
Current Draw: 10mA

Jeti Telemetry Sensor RPM Opto MRPM EX

$US 41

The Opto MRPM EX sensor is used to optically measure the speed (RPM) of propeller driven models. The optic sensor calculates RPM by monitoring the interruption of light (sunlight or incandescent light). The optical sensor is housed inside a metal tube to help reduce unwanted reflections for better accuracy. Using the JetiBox, the Opto MRPM EX allows you to set your propeller blade count, multiple alarms and can even display the motor power in Watts.

Dimensions: 19mm x 14mm x 4mm
Weight: 6g (with wires)
Precision: 10U per minute
Operation Temp: -10C to +85C
Supply Voltage: 3.5V to 8.4V
Current Draw: 10mA

Jeti Telemetry Sensor Temperature MT125 EX Replacement Probe

$US 9

Jeti Telemetry Sensor Temperature MT125 EX w/Probes

$US 43

The MT125 EX module monitors two individual temperature sensors (2x Included) and also records the minimum and maximum temperatures of each sensor. You can use the MT125 EX on-board when used with a Duplex receiver, Duplex Expander or hand-held when connected directly to a JetiBox Profi. The MT125 EX allows you to set alarms to let you know if the temperature is either too high or too low than the user-defined settings for each sensor.

Dimensions: 19mm x 14mm x 4mm
Weight: 4g (without wires)
Number of Temp Sensors: 2 (included)
Temperature Sensor Range: -55C to +125C
Measuring Accuracy: 0.5C
Operation Temp: -10C to +85C
Supply Voltage: 3.5V to 8.4V
Current Draw (w/Sensors): 7mA

Jeti Telemetry Sensor Temperature MT300 EX

$US 49

The MT300 EX module monitors two individual temperature sensors and also records the minimum and maximum temperatures of each sensor. You can use the MT300 EX on-board when used with a Duplex receiver, Duplex Expander or hand-held when connected directly to a JetiBox Profi. The MT300 EX allows you to set alarms to let you know if the temperature is either too high or too low than the user-defined settings for each sensor.

Dimensions: 19mm x 14mm x 4mm
Weight: 3g (without wires)
Number of Temp Sensors: 2
Temperature Sensor Range: -40C to +300C
Measuring Accuracy: 5C
Operation Temp: -10C to +85C
Supply Voltage: 3.5V to 8.4V
Current Draw (w/Sensors): 7mA

Jeti Telemetry Sensor Voltage MU3 EX

$US 42

The MU3 EX sensor is used with a Duplex receiver to monitor the voltage (U) of up to three different inputs. The MU3 EX sensor is equipped with three user-defined low voltage alarms and an error alarm. The voltage minimum and maximum for each input is also recorded.
Dimensions: 36mm x 20mm x 5mm
Weight: 18g with wires
Measures: A: 0-9.9V, B/C: 0-20V
Supply Voltage: 3.5V to 8.4V
Current Draw: 8mA
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Jeti Telemetry USB Adapter: $US 18

 

 

 

 

 
 
 
Copyright you.com. All Rights Reserved.
Web Master