Quality RC products

Home

(416) 418 1382 | Call Today

Accessories

Actuonix

Air Accessories

Festo Fittings

Fuel Accessories

Hysol Glue

Jets

Wheels and brakes

ALTECARE RC

 

We carry the full range of PowerBox systems

PowerBox iGyro GPS option: $US 115

 

PowerBox Mercury SRS

Features

Integral iGyro: Triple-axis gyro system with attitude assist function
Expanded setup assistant for ultra-simple operation
Special regulatory algorithm for fixed-wing model aircraft
Six independent gyro outputs for: 2 x ailerons, 2 x elevators, 2 x rudders
Special thrust vector support
GPS-regulated gyro gain
Extremely accurate six-axis MEMS sensor
Integral Delta and V-tail mixer
Door sequencer: freely programmable outputs with set-up assistant
Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs
SRS: Serial Receiver System provides the facility to use receivers with serial interface:

Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti UDI, Multiplex M-Link, HoTT and JR X-BUS
Unrestricted channel assignment for all 15 PowerBox outputs
Graphic OLED screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
15 channels
Signal amplification and interference suppression for all 15 outputs
Flight recorder, recording of lost frames and fail-safe events
Variable frame rate, range 12ms – 21ms
16-bit processors for fast, high-resolution signal processing
Double-regulated output voltages for receivers and servos
regulated output voltage 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT, JR and Multiplex MSB downlink bus systems
Direct transmission of the battery informations, receiver data and GPS data to the transmitter
Separate voltage display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types: LiPo/LiIon, NiMh/NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface or BlueCom adapter

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 99mA (with OLED)
Current drain Standby 3µA
Maximum load current Peak 2x20A
Drop-out voltage 0.3V
Output voltage 5.9V or 7.4V regulated

PowerBox Mercury SRS w/OLED W/O GPS: $US 395

PowerBox Mercury SRS w/OLED W GPS: $US 495

 

MicroMatch
Servomatching by Mobile App



The PowerBox MicroMatch is the ideal solution for models where there is no space for a PowerBox, or where the PowerBox in use does not include the MicroMatch’s functions

The MicroMatch provides a very simple method of fine-tuning the servo travels and centre positions of both outputs. Its main application is for systems where two servos operate a single control surface; the unit can match them electronically to run exactly in parallel. The MicroMatch includes a servo reverse function which changes the direction of rotation of the servos with a single click. This is ideal for elevator servos which are installed as a mirror-image pair, allowing them to be operated using just one channel

All adjustments can be carried out using the USB interface (Jeti and MPX adapters can also be used) or a BlueCom adapter. The BlueCom option offers one very practical feature: it is possible to make direct adjustments at the servo output arm, and alter the settings conveniently using a mobile phone and a Bluetooth link!

The MicroMatch includes an update facility, allowing for possible future expansions to the range of functions

Micro Match Servo Matching: $US 29.95

Magic Jeti Switch
Switch on your model from the transmitter!



The Magic Jeti Switch makes it possible to switch any PowerBox on and off from the transmitter

It forms the ideal complement to any PowerBox system which is installed in an inaccessible location,

or in a model where an external switch is not desirable.

The Magic Jeti Switch is available in two versions:

one is fitted with a red plug, and is suitable for the BaseLog, Evolution, Competition and Cockpit

the other with a black plug, suitable for the Royal SRS and Champion SRS

Magic Jeti Switch with red connector: $US 29.95

Magic Jeti Switch with black connector: $US 29.95

New PowerBox Sensor now with 7.4V regulated output

Features

Double-regulated output voltages for receivers and servos
7.4V output voltage
Separate voltage LED for each battery
Minimum value memory alerts the user to voltage collapses
Support for three battery types: LiPo, NiMH / NiCd, LiFePo
Suppression of any servo feedback currents which may occur

Technical Data

Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state: 30mA
Current drain Standby: 5µA
Maximum load current: Peak 2x4A
Drop-out voltage: 0.3V
Output voltage: 5.9V regulated
Dimensions: 65 x 23 x 26 mm
Weight: 35g
Temperature range: -30°C to +75°C

PB Sensor 5.9V JR/JR Connectors: $US 79
PB Sensor 5.9V MPX/JR Connectors: $US 85
PB Sensor 7.4V MPX/JR Connectors: $US 89

PowerBox BlueCom™ Adapter


Wireless updates and setup of PowerBox products
The BlueCom™ adapter provides a means of setting up PowerBox products wirelessly, and of updating the software to the latest version. To use the adapter all you have to do is simply and conveniently download the corresponding App for your Mobilphone or tablet from Google Play, the Apple Appstore or the Windows Store - at no charge! Once you have installed the App on your mobile telephone or tablet, you can plug the BlueCom™ adapter into a PowerBox device. You are then in a position to load the latest update or alter settings. For example, the BlueCom™ adapter enables you to adjust all the various settings available on the iGyro3e* and iGyro1e* conveniently from your mobile phone.

* Setup procedures for the iGyro3e and other PowerBox products are currently fully supported; the update function is implemented for all devices. A current list of what devices are supported can be found in our Support forum. The Apps will be constantly expanded.
Features:

Wireless Bluetooth connection to the PowerBox device
Updates and set-up work carried out very simply using your mobile phone or tablet
Setup the iGyro3e with your mobile phone
Free App for Apple and Android devices (Windows Phone due shortly)
Automatic online update function

PowerBox BlueCom™ Adapter Apple $US 59.95

PowerBox BlueCom™ Adapter Android $US 59.95

iGyro 1e: $US 85

iGyro 1e or 3e USB Interface cable: $US30

iGyro 3e

Extremely accurate triple-axis MEMS sensor
Special regulatory algorithm designed for fixed-wing model aircraft
Three axes distributed to five servos, each adjustable independently
Input and output with PWM Signals
Input for in-flight gain adjustment
Heading or Normal mode can be selected in flight
Integral delta mixer
Installed orientation can be selected
16-bit processor for fast, high-resolution signal processing
Updateable with PowerBox Systems USB Interface connectors
Robust anodized aluminium case

iGyro 3e $US 235:

SRS Expander

The PowerExpander expandes up to 18 channels provided by your RX

Access to a maximum of eighteen channels
Simple wiring: the receivers are connected using a serial link
Integral SRS, allowing the use of two receivers
Compatible with: Futaba, Spektrum, Graupner, Jeti, Multiplex and JR
High-current power socket MPX or Deans
S-BUS output for use in a BUS system
Hold/Failsafe option for each output individual
User-variable frame rate
Can be updated using the PowerBox USB Interface

SRS Expander $US 150

PowerBox BaseLog Dual Battery Regulator

 

Specifications:

Operating voltage: 4.0 Volt to 9.0 Volt
Power supply:
2 x 2-cell LiPo battery, 7.4 Volt,
2 x 5-cell NiCd or NiMH batteries,
2 x 2-cell LiFePo battery (A123)
Current drain:
Switched on: approx. 85 mA
Switched off: approx. 10 µA
Dropout voltage: approx. 0.25 V
Max. receiver and 2 x 10 A (stabilised), according to cooling measures
Servo / receiver current:
Peak 2 x 20 A
OLED screen resolution: 128x64 pixels
Bus systems: Spektrum, Multiplex
Temperature range: -30°C to +75°C
Dimensions:
93 x 67 x 19 mm (incl. base plate)
Weight: 88 g
SensorSwitch: 15 g
EMV approval: EN 55014-1:2006
CE approval: 2004/108/EG

Registered design: DE 203 13 420.6

Download Manual

PowerBox BaseLog Review

BaseLog w/patch wires MPX/JR/Futaba: $US 169

 

PowerBox Royal SRS w/ LCD w/o GPS: $US 699

PowerBox Royal SRS w/ LCD w/ GPS: $US 749

 

PowerBox Royal Spektrum w/o LCD w/o Adj. Bd.: $US 589

PowerBox Royal Spektrum w/ LCD w/o Adj. Bd.: $US 679

PowerBox Royal Spektrum w/ LCD w/ Adj. Bd.: $US 729

 

PowerBox Champion SRS: $US 499

PowerBox Cockpit SRS: $US 379

PowerBox Competition SRS: $US 349

PowerBox Cockpit: $US 349

PowerBox Competition: $US 319

PowerBox Professional: $US 269

 

 

 

 

 

 

 

 
 
 
Copyright you.com. All Rights Reserved.
Web Master