+



 

Quality RC products

We promote quality products with a commitment to customer satisfaction

Home

(416) 418 1382 | Call Today

 

 

 

Aeromodel engine X45 Compact version

Turbojet X45
Compact version. Includes combined data terminal and connecting hub.
• Power: 45N - 10lb
• Extremely low residual thrust: 1,8 N -0,4 lb
• Exceptional idle to full thrust ratio of 25 times.
• Max RPM: 225.000
• Minimum RPM: 60.000
• Diameter: 59,8 mm
• Lenght: 165 mm
• Engine weight: 395 g including mounting strap and FOD filter.
• Installed weight: 484 g (inc Engine, Pump and leads. Not inclusive of battery.)
• Fuel Comsumption: 20 g/min at idle. 145 g/min at full power.
• Easily adjustable thrust output in Newton and in Lb from 1,8 N to 45 N.
• Kerosene and diesel fuel + 4% oil
• Kerostart fast starting of 25 sec.
• Inflight Restart technology. Typically half time than Normal Start.
• Brushless fuel pump with integrated controller.
• High speed Brushless starter motor.
• All new Fully Integrated ecu.
• Telemetry for Jeti, Futaba, HoTT, MPX, PB Core, Spektrum, JR and FrSky. (Optional module)
• Fuel and FOD filters included.

Turbojet X45: $US 2,080

Aeromodel engine X90 Compact version

Turbojet X90 : $US 2,170

Aeromodel engine X120 Compact version

Turbojet X120 : $US 2,450

Aeromodel engine X180 Compact version

Turbojet X180 : $US 2,760

Aeromodel engine X45Heli Compact version

Turbojet X45Heli: $US 3,215

Turboshaft X45H
NO stock. Estimated delivery time 10 weeks. Contact us for preorder
Helicopter engine, designed to replace the popular OS90 and similar Nitro engines. Same shaft and mounting dimensions as standard Nitro engine.
Compact version. Includes combined data terminal and connecting hub.
• Power: 3.6kW - 4.9HP
• RPM output: 8.000 ... 20.000
• Governor function for constant head speed adjustable between 800 and 2500 rpm.
• Diameter: 59,8 mm
• Engine weight: 1150 g including FOD filter.
• Installed weight: 1.240 g (inc Engine, Pump and leads. Not inclusive of battery.)
• Fuel Comsumption: 20 g/min at idle. 110 g/min at full power.
• Easily adjustable power output in Kw and in HP.
• Kerosene and diesel fuel + 4% oil
• Kerostart fast starting of 25 sec
• Brushless fuel pump with integrated controller
• High speed Brushless starter motor
• All new Fully Integrated ecu
• Telemetry for Jeti, Futaba, HoTT, MPX, PB Core, Spektrum, JR and FrSky. (Optional module)
• Fuel and FOD filters included.

Aeromodel engine X45Turboprop Compact version

Turbojet X45Turboprop: $US 3,495

Look for the full range of Xicoy products updating soon

 

Telemetry adapter Futaba, Jeti and Multipleax RXs
Supports JetsMunt, Jetcentral, Kingtech and Wren Turbines

 

Adapter connects the telemetry data from XICOY V10 and newer ecus (all that use a servo lead on data terminal connection) to JETI FUTABA and MULTIPLEX receivers.

Supports several engines on the same receiver

Ecus V6 and older (connector RJ45 8 pin) not supported

Supports Futaba MZ18 and SG14 (Robbe Telemetry Box not supported)

Translates all relevant parameters (RPM, EGT, battery, Pump, Throttle and remaining fuel) from the ecu to the TX, where they can be recorded and alarms set.

If used on JETI radios, it provides full emulation of the ecu data terminal trough Jetibox to access to all ecu functions, and to monitor the startup of the engine. Keystrokes of the buttons on the transmiiter are sent to the ecu to allow the navigation through all the menus on the ecu.

On Futaba radios the measures of the received signal strenth and failsafe counter are transmitted to the TX for a evaluation of the quality of the radio link and to set a alarm if link became marginal

User Manual Download

Checkout the videos:

Navigating trough the ecu menus from transmitter

Monitoring the engine startup

Engine run, data logiing and displaying the data after a run

Video Futaba

Manual

Telemetry adapter Futaba, Jeti and Multiplex RXs: $US 59

Telemetry adapter Spektrum RXs: $US 59

 

 

 

 

 

 

 

 

 

 

 

 
 

Copyright you.com. All Rights Reserved.
Web Master